Code Image Name Description Price 8202 Belt Tail rotor drive belt. 5104 Belt threading hook Essential for threading the belt through the boom tube. 5022 Boom Lightweight boom tube, marked with rings to aid alignment. 5022A Boom, plain Lightweight boom tube, without alignment marks 5125 Canopy, classic Plain white, with black window applied. Forming strap. 5125P Canopy, Hoverfly Pro Hoverfly Pro canopy 3001 Command line (3.5m) Length 3.5 metres (approx 12 ft) fine multistrand wire: connectors at both ends. 5003 Dome Push fit to top of rotor shaft. 1009 FlightPad controller Two-joystick game style controller, with battery. Use with Hoverfly. 5019 Grommet Fit on boom to provide shock mounting to mainframe. 1004 Mainframe / commutator Main chassis with pre-aligned commutator. Canopy mounting foam fitted. SH030 Motor, main Fits into motor bracket on the end of rotor arm. Soldering required. 7302(4) Patch links (4) Four pre-formed wire links for the patch socket in the ECP. PSU-UNI2 Power Supply, universal Input 100-240Vac, 50/60 Hz . Output 36 Vdc 5024(6) Propellers (pack of 6) Six matched props. Thrust group 9. 5013 Pulley, Idler Rotates on PIN 5016 5015 Pulley, tail Rotates on PIN 5016 5014 Pulley, tail motor Push-on fit to shaft of tail drive motor. 5016(2) Pulley Pins (pair) Shafts for Tail and Idler pulleys 1011 Rotor, 'Sport', complete Carbon fibre arms. Tested 'Sport' rotor complete, with 3 props. 1012A Rotor, 'Sport', sub-assembly Carbon fibre arms. Rotor sub-assembly. Just add motors, brushes and 3 props. 1021 Rotor, standard, complete Carbon fibre arms. Tested and ready to fit, with 3 props. 1022A Rotor, standard, sub-assembly Carbon fibre arms. Rotor sub-assembly. Just add motors, brushes and 3 props. 7201(4) Rotor brushes (4) Set of four brushes: solder to hub PCB on sub rotors. 6303 Rotor retainer Phosphor bronze spring collar grips rotor shaft. 3003 Signal lead 3003: Tx to ECP: 1.25 m 6-way DIN plug. Suits Futaba and Hitec transmitters. 3005 Signal lead 3005: Tx to ECP: 1.25 m 6-way DIN plug. Suits some Sanwa transmitters. 3007 Signal lead 3007: Tx to ECP: 1.25 m 5-way DIN plug. Suits Sanwa RD6000, VG600 and Airtronics transmitters. 3020 Signal lead 3020: Tx to ECP: 1.25 m 5-way DIN plug. Suits most Multiplex transmitters. 3021 Signal lead 3021: Tx to ECP: 1.25 m 5-way DIN plug. Suits older Futaba transmitters. 3002 Signal lead 3002: Tx to ECP: 1.25 m (in box as standard) 3.5 mm jack. Suiits JR type and older Sanwa transmitters. 3023 Signal lead 3023: Tx to ECP: 1.25m 6-way FF9, Suits new Futaba FF9 (square plug) transmitters. 3025 Signal Lead Extender Increases the standard signal lead by 2.5m 3011 Signal lead, FlightPad to PC With 9-pin D type connector for serial port. Length 1.25 metres. 3010 Mains lead Euro Euro Power cord, length 2 metres. 3008 Mains lead UK UK Power cord, length 2 metres 3009 Mains lead USA USA Power cord, length 2 metres. 3004 Tail motor With wiring and connector ready to plug in. 5018 Tail rotor retainer Fixes tail rotor to tail pulley 5010 Tail motor bracket Fits to front of boom: for tail drive motor mounting. 5102 Tail rotor Clear plastic, pre-formed tail rotor. Adjustment For use if instructed by E-mail